UEE20120 Certificate II in Split Air Conditioning and Heat Pump Systems
Start Your Career in Air Conditioning Installation.
This qualification covers the competencies required to install, commission, and decommission single-head split air conditioning and heat pump systems with a refrigeration capacity of up to 18 kW. Systems included are wall-hung, floor- and ceiling-suspended, cassette, and ducted fan coil split systems, as well as water-heating heat pump systems.
Overview
Campus Geraldton
When Semester 1, 2026 | Semester 2, 2026
Study Mode On campus
Duration 23 Weeks to 5 Days
Start Your Career in Air Conditioning Installation.
This qualification covers competencies to install, commission and decommission single head, split air conditioning and heat pumps systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kilowatt (kW) refrigeration.
Please note that this course does not include training in servicing, repair, maintenance, fault finding, electrical work, or the safe installation of commercial refrigeration, air conditioning and heat pump plant and equipment.
Refrigerant Handling Licence:
The qualification meets only the training components for a national restricted heat pump, split system, installation and decommissioning Refrigerant Handling Licence, which is required to work on equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant, installing, commissioning or decommissioning refrigeration and air conditioning equipment.
Refrigeration and Air Conditioning Occupational Licence:
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to refrigeration/air conditioning work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Select your preferred campus and apply
Semester 1, 2026
Details
Course fees
Units and fees
To attain this qualification, you are required to successfully complete units of competence to the value of three hundred and seventy (370) weighting points, comprising of three hundred and fifty (350) core weighting points and elective units to the value of twenty (20) weighting points, selected from the options provided below.
Core
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
| UEECD0007 Apply work health and safety regulations, codes and practices in the workplace | $87.84 | $26.46 | $12.38 |
| UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work | $87.84 | $26.46 | $13.59 |
| UEECD0019 Fabricate, assemble and dismantle utilities industry components | $175.68 | $52.92 | $25.43 |
| UEECD0020 Fix and secure electrotechnology equipment | $87.84 | $26.46 | $12.38 |
| UEECD0027 Participate in development and follow a personal competency development plan | $87.84 | $26.46 | $13.59 |
| UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications | $175.68 | $52.92 | $26.53 |
| UEERA0049 Install and start up single head split air conditioning and water heating heat pump systems | $307.44 | $92.61 | $48.99 |
| UEERA0059 Prepare and connect refrigerant tubing and fittings | $175.68 | $52.92 | $28.32 |
| UEERA0064 Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | $263.52 | $79.38 | $42.55 |
| UEERE0001 Apply environmentally and sustainable procedures in the energy sector | $87.84 | $26.46 | $12.38 |
Elective
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$29.28 | $8.82 | $4.91 |
Unit Selection - Credit Transfer
Students must select ONE of the units below and this will need to be completed to achieve the qualification however students may have successfully completed the unit below as part of previous study. As a Credit Transfer no fees or charges are applicable.
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$19.52 | $5.88 | $1.61 |
|
|
$87.84 | $26.46 | $0.00 |
Please note: Course information and fees are subject to change without notice.
- Fees may differ between campus locations due to the difference between elective units in the course study plan or a need to adapt courses to meet local industry needs.
- Fees may also differ for individuals depending on units of study selected, prior qualifications and recognition of prior learning (RPL).
- Fees are payable at the time of enrolment.
- Total fees quoted include tuition fees and resource fees only. You may also be required to purchase text books, uniforms or other personal equipment that are not included in this fee estimate.
- For Lower Fees, Local Skills (half-price) courses please refer to additional eligibility information above.
- Concession rates: If eligible, proof of concession must be presented.
- Concessions and the secondary school age fee cap do not apply to commercial courses (short courses), or Foundation Programs (i.e ESL and General Education).
- Secondary school aged persons (in 2026, students born on or after 1 July 2008 who are at least 15 years old in 2026) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course (tuition) fee chargeable is $420. Additional resource fees and discretionary fees may apply.
- VET Student Loans for eligible courses and fee caps may be subject to changes implemented by the Australian Government.
More information: Visit our fees and payment options page or call us on 1800 672 700
Details
Course fees
Units and fees
To attain this qualification, you are required to successfully complete units of competence to the value of three hundred and seventy (370) weighting points, comprising of three hundred and fifty (350) core weighting points and elective units to the value of twenty (20) weighting points, selected from the options provided below.
Core
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
| UEECD0007 Apply work health and safety regulations, codes and practices in the workplace | $87.84 | $26.46 | $12.38 |
| UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work | $87.84 | $26.46 | $13.59 |
| UEECD0019 Fabricate, assemble and dismantle utilities industry components | $175.68 | $52.92 | $25.43 |
| UEECD0020 Fix and secure electrotechnology equipment | $87.84 | $26.46 | $12.38 |
| UEECD0027 Participate in development and follow a personal competency development plan | $87.84 | $26.46 | $13.59 |
| UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications | $175.68 | $52.92 | $26.53 |
| UEERA0049 Install and start up single head split air conditioning and water heating heat pump systems | $307.44 | $92.61 | $48.99 |
| UEERA0059 Prepare and connect refrigerant tubing and fittings | $175.68 | $52.92 | $28.32 |
| UEERA0064 Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | $263.52 | $79.38 | $42.55 |
| UEERE0001 Apply environmentally and sustainable procedures in the energy sector | $87.84 | $26.46 | $12.38 |
Elective
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$29.28 | $8.82 | $4.91 |
Unit Selection - Credit Transfer
Students must select ONE of the units below and this will need to be completed to achieve the qualification however students may have successfully completed the unit below as part of previous study. As a Credit Transfer no fees or charges are applicable.
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$19.52 | $5.88 | $1.61 |
|
|
$87.84 | $26.46 | $0.00 |
Please note: Course information and fees are subject to change without notice.
- Fees may differ between campus locations due to the difference between elective units in the course study plan or a need to adapt courses to meet local industry needs.
- Fees may also differ for individuals depending on units of study selected, prior qualifications and recognition of prior learning (RPL).
- Fees are payable at the time of enrolment.
- Total fees quoted include tuition fees and resource fees only. You may also be required to purchase text books, uniforms or other personal equipment that are not included in this fee estimate.
- For Lower Fees, Local Skills (half-price) courses please refer to additional eligibility information above.
- Concession rates: If eligible, proof of concession must be presented.
- Concessions and the secondary school age fee cap do not apply to commercial courses (short courses), or Foundation Programs (i.e ESL and General Education).
- Secondary school aged persons (in 2026, students born on or after 1 July 2008 who are at least 15 years old in 2026) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course (tuition) fee chargeable is $420. Additional resource fees and discretionary fees may apply.
- VET Student Loans for eligible courses and fee caps may be subject to changes implemented by the Australian Government.
More information: Visit our fees and payment options page or call us on 1800 672 700
Details
Course fees
Units and fees
To attain this qualification, you are required to successfully complete units of competence to the value of three hundred and seventy (370) weighting points, comprising of three hundred and fifty (350) core weighting points and elective units to the value of twenty (20) weighting points, selected from the options provided below.
Core
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
| UEECD0007 Apply work health and safety regulations, codes and practices in the workplace | $87.84 | $26.46 | $12.38 |
| UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work | $87.84 | $26.46 | $13.59 |
| UEECD0019 Fabricate, assemble and dismantle utilities industry components | $175.68 | $52.92 | $25.43 |
| UEECD0020 Fix and secure electrotechnology equipment | $87.84 | $26.46 | $12.38 |
| UEECD0027 Participate in development and follow a personal competency development plan | $87.84 | $26.46 | $13.59 |
| UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications | $175.68 | $52.92 | $26.53 |
| UEERA0049 Install and start up single head split air conditioning and water heating heat pump systems | $307.44 | $92.61 | $48.99 |
| UEERA0059 Prepare and connect refrigerant tubing and fittings | $175.68 | $52.92 | $28.32 |
| UEERA0064 Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | $263.52 | $79.38 | $42.55 |
| UEERE0001 Apply environmentally and sustainable procedures in the energy sector | $87.84 | $26.46 | $12.38 |
Elective
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$29.28 | $8.82 | $4.91 |
|
|
$19.52 | $5.88 | $1.61 |
Please note: Course information and fees are subject to change without notice.
- Fees may differ between campus locations due to the difference between elective units in the course study plan or a need to adapt courses to meet local industry needs.
- Fees may also differ for individuals depending on units of study selected, prior qualifications and recognition of prior learning (RPL).
- Fees are payable at the time of enrolment.
- Total fees quoted include tuition fees and resource fees only. You may also be required to purchase text books, uniforms or other personal equipment that are not included in this fee estimate.
- For Lower Fees, Local Skills (half-price) courses please refer to additional eligibility information above.
- Concession rates: If eligible, proof of concession must be presented.
- Concessions and the secondary school age fee cap do not apply to commercial courses (short courses), or Foundation Programs (i.e ESL and General Education).
- Secondary school aged persons (in 2026, students born on or after 1 July 2008 who are at least 15 years old in 2026) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course (tuition) fee chargeable is $420. Additional resource fees and discretionary fees may apply.
- VET Student Loans for eligible courses and fee caps may be subject to changes implemented by the Australian Government.
More information: Visit our fees and payment options page or call us on 1800 672 700
Semester 2, 2026
Details
Course fees
Units and fees
To attain this qualification, you are required to successfully complete units of competence to the value of three hundred and seventy (370) weighting points, comprising of three hundred and fifty (350) core weighting points and elective units to the value of twenty (20) weighting points, selected from the options provided below.
Core
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
| UEECD0007 Apply work health and safety regulations, codes and practices in the workplace | $87.84 | $26.46 | $12.38 |
| UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work | $87.84 | $26.46 | $13.59 |
| UEECD0019 Fabricate, assemble and dismantle utilities industry components | $175.68 | $52.92 | $25.43 |
| UEECD0020 Fix and secure electrotechnology equipment | $87.84 | $26.46 | $12.38 |
| UEECD0027 Participate in development and follow a personal competency development plan | $87.84 | $26.46 | $13.59 |
| UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications | $175.68 | $52.92 | $26.53 |
| UEERA0049 Install and start up single head split air conditioning and water heating heat pump systems | $307.44 | $92.61 | $48.99 |
| UEERA0059 Prepare and connect refrigerant tubing and fittings | $175.68 | $52.92 | $28.32 |
| UEERA0064 Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | $263.52 | $79.38 | $42.55 |
| UEERE0001 Apply environmentally and sustainable procedures in the energy sector | $87.84 | $26.46 | $12.38 |
Elective
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$29.28 | $8.82 | $4.91 |
Unit Selection - Credit Transfer
Students must select ONE of the units below and this will need to be completed to achieve the qualification however students may have successfully completed the unit below as part of previous study. As a Credit Transfer no fees or charges are applicable.
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$19.52 | $5.88 | $1.61 |
|
|
$87.84 | $26.46 | $0.00 |
Please note: Course information and fees are subject to change without notice.
- Fees may differ between campus locations due to the difference between elective units in the course study plan or a need to adapt courses to meet local industry needs.
- Fees may also differ for individuals depending on units of study selected, prior qualifications and recognition of prior learning (RPL).
- Fees are payable at the time of enrolment.
- Total fees quoted include tuition fees and resource fees only. You may also be required to purchase text books, uniforms or other personal equipment that are not included in this fee estimate.
- For Lower Fees, Local Skills (half-price) courses please refer to additional eligibility information above.
- Concession rates: If eligible, proof of concession must be presented.
- Concessions and the secondary school age fee cap do not apply to commercial courses (short courses), or Foundation Programs (i.e ESL and General Education).
- Secondary school aged persons (in 2026, students born on or after 1 July 2008 who are at least 15 years old in 2026) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course (tuition) fee chargeable is $420. Additional resource fees and discretionary fees may apply.
- VET Student Loans for eligible courses and fee caps may be subject to changes implemented by the Australian Government.
More information: Visit our fees and payment options page or call us on 1800 672 700
Details
Course fees
Units and fees
To attain this qualification, you are required to successfully complete units of competence to the value of three hundred and seventy (370) weighting points, comprising of three hundred and fifty (350) core weighting points and elective units to the value of twenty (20) weighting points, selected from the options provided below.
Core
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
| UEECD0007 Apply work health and safety regulations, codes and practices in the workplace | $87.84 | $26.46 | $12.38 |
| UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work | $87.84 | $26.46 | $13.59 |
| UEECD0019 Fabricate, assemble and dismantle utilities industry components | $175.68 | $52.92 | $25.43 |
| UEECD0020 Fix and secure electrotechnology equipment | $87.84 | $26.46 | $12.38 |
| UEECD0027 Participate in development and follow a personal competency development plan | $87.84 | $26.46 | $13.59 |
| UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications | $175.68 | $52.92 | $26.53 |
| UEERA0049 Install and start up single head split air conditioning and water heating heat pump systems | $307.44 | $92.61 | $48.99 |
| UEERA0059 Prepare and connect refrigerant tubing and fittings | $175.68 | $52.92 | $28.32 |
| UEERA0064 Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | $263.52 | $79.38 | $42.55 |
| UEERE0001 Apply environmentally and sustainable procedures in the energy sector | $87.84 | $26.46 | $12.38 |
Elective
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$29.28 | $8.82 | $4.91 |
Unit Selection - Credit Transfer
Students must select ONE of the units below and this will need to be completed to achieve the qualification however students may have successfully completed the unit below as part of previous study. As a Credit Transfer no fees or charges are applicable.
| National ID Unit title | General | Concession | Resource |
|---|---|---|---|
|
|
$19.52 | $5.88 | $1.61 |
|
|
$87.84 | $26.46 | $0.00 |
Please note: Course information and fees are subject to change without notice.
- Fees may differ between campus locations due to the difference between elective units in the course study plan or a need to adapt courses to meet local industry needs.
- Fees may also differ for individuals depending on units of study selected, prior qualifications and recognition of prior learning (RPL).
- Fees are payable at the time of enrolment.
- Total fees quoted include tuition fees and resource fees only. You may also be required to purchase text books, uniforms or other personal equipment that are not included in this fee estimate.
- For Lower Fees, Local Skills (half-price) courses please refer to additional eligibility information above.
- Concession rates: If eligible, proof of concession must be presented.
- Concessions and the secondary school age fee cap do not apply to commercial courses (short courses), or Foundation Programs (i.e ESL and General Education).
- Secondary school aged persons (in 2026, students born on or after 1 July 2008 who are at least 15 years old in 2026) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course (tuition) fee chargeable is $420. Additional resource fees and discretionary fees may apply.
- VET Student Loans for eligible courses and fee caps may be subject to changes implemented by the Australian Government.
More information: Visit our fees and payment options page or call us on 1800 672 700